Submit a Laser Cutting Job
SUBMITTING LASER CUTTING JOB
Jobs are processed on a first come first serv basis & will be cut ASAP. All cut jobs must be accompanied with the Laser Lab Job Sheet which can be picked up from B24.
You can submit your DWG file with the Laser Lab Job Form in one of the following ways:
Via Email at firstname.lastname@example.org
Hand deliver DWG file and Laser Lab Job Form in a CD or Flash Drive to B16 CFA.
X600 Laser Cutter Specifications
Bed Size: 18″x32″
Maximum Sheet Size: 17.75″ x 31.75″
Printable Area: 17.5″ x 31.5″
Set cut lines as RED.
Set etch lines as CYAN.
Set guidelines as YELLOW. *
*Yellow lines will not be cut or etched. When sending files to print, create a yellow box that is 18″ x 32″. Set all objects to be cut or etched inside that yellow box.